How to resize an image in cm or inches for printing
By the Fusion Office team · Updated
Quick answer
Open Resize image, choose Print size, enter the width and height in cm, mm or inches, set the DPI (300 for sharp prints), and press Resize. A 4 × 6 inch print at 300 DPI needs 1200 × 1800 pixels; an A4 page needs about 2480 × 3508. If your image has fewer pixels, print it smaller or at a lower DPI.
Pixels needed for common prints
- Passport photo 3.5 × 4.5 cm at 300 DPI: about 413 × 531 pixels.
- 4 × 6 inch photo at 300 DPI: 1200 × 1800 pixels.
- 5 × 7 inch photo at 300 DPI: 1500 × 2100 pixels.
- A4 (21 × 29.7 cm) at 300 DPI: about 2480 × 3508 pixels; at 150 DPI, 1240 × 1754.
The formula is pixels = inches × DPI, or cm ÷ 2.54 × DPI. 300 DPI is the usual target for photos viewed up close; posters viewed from a distance look fine at 150 DPI.
Resize step by step
- 1Crop to the print's shape first with Crop image (4:6 for a 4 × 6 print), so nothing gets stretched.
- 2Open Resize image and choose Print size.
- 3Pick the unit (cm, mm or inches), enter the size, and set the DPI.
- 4Keep proportions on; if the shapes differ, choose crop to fill or add borders rather than stretching.
- 5Press Resize and download.
If your image is too small
Resizing up adds pixels but no detail, so a small web image printed large looks soft. Either print smaller, accept a lower DPI (150–200 is often fine for larger prints), or find the original, higher-resolution file. Brightening and sharpening slightly in the Image editor can help prints look crisper.
Frequently asked questions
What DPI should I use for printing photos?
300 DPI for photos held in the hand; 150–200 DPI is enough for posters and large prints viewed from further away.
Does changing DPI alone change the print size?
Only in combination with pixels. Resize image calculates the pixels from the size and DPI you enter.